|
[ 051
]
Interstellar Search Method with Mesh Adaptive Direct Search for Optimal Design of Brushless DC Motor
|
|
Byungkwan Son, Gyeong-Jae Park, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Interstellar Search Method with Mesh Adaptive Direct Search for Optimal Design of Brushless DC Motor", IEEE Trans. Magn., vol. 52, no. 3, pp. 8201004, 2016.03
Link
|
|
[ 050
]
Search Region Management Method for Local Search Algorithm Employing Design Optimization of Brushless DC Motor
|
|
Tae-Yong Lee, Pham Xuan Trung, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Search Region Management Method for Local Search Algorithm Employing Design Optimization of Brushless DC Motor", IEEE Trans. Magn., vol. 52, no. 3, pp. 8200606, 2016.03
Link
|
|
[ 049
]
A Novel Memetic Algorithm Using Modified Particle Swarm Optimization and Mesh Adaptive Direct Search for PMSM Design
|
|
Jinhwan Lee, Jong-Wook Kim, Jun-Young Song, Yong-Jae Kim, Sang-Yong Jung, "A Novel Memetic Algorithm Using Modified Particle Swarm Optimization and Mesh Adaptive Direct Search for PMSM Design ", IEEE Trans. Magn., vol. 52, no. 3, pp. 7001604, 2016.03
Link
|
|
[ 048
]
Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate-Assited Multi-Objective Optimization
|
|
Dong-KuK Lim, Kyung-Pyo Yi, Sang-Yong Jung, Hyun-Kyo Jung, Jong-Suk Ro, "Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate-Assited Multi-Objective Optimization", IEEE Trans. Magn., vol. 51, no. 11, pp. 8207504, 2015.11
Link
|
|
[ 047
]
Optimal Design of Novel Pole Piece for Power Density Improvement of Magnetic Gear Using Polynomial Regression Analysis
|
|
Sung-Jin Kim, Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim, "Optimal Design of Novel Pole Piece for Power Density Improvement of Magnetic Gear Using Polynomial Regression Analysis", IEEE Trans. Energy Convers., vol. 30, no. 3, pp. 1171-1179, 2015.09
Link
|
|
[ 046
]
Design and Torque Ripple Analysis of Brush-less DC Motor According to Delta Winding Connection
|
|
Tae-Yong Lee, Myung-Ki Seo, Yong-Jae Kim, Sang-Yong Jung, "Design and Torque Ripple Analysis of Brush-less DC Motor According to Delta Winding Connection", Journal of Magnetics, vol. 20, no. 2, pp. 166-175, 2015.06
Link
|
|
[ 045
]
Air-Barrier Width Prediction of Interior Permanent Magnet Motor for Electric Vehicle Considering Fatigue Failure by Centrifugal Force
|
|
Sung-Jin Kim, Sang-Yong Jung, Yong-Jae Kim, "Air-Barrier Width Prediction of Interior Permanent Magnet Motor for Electric Vehicle Considering Fatigue Failure by Centrifugal Force", Journal of Electrical Engineering & Technology, vol. 10, no. 3, pp. 952-957, 2015.05
Link
|
|
[ 044
]
A novel surrogate-assisted multi-objective optimization algorithm for an electromagnetic machine design
|
|
Dong-KuK Lim, Dong-Kyun Woo, Han-Kyeol Yeo, Sang-Yong Jung, Hyun-Kyo Jung, Jong-Suk Ro, "A novel surrogate-assisted multi-objective optimization algorithm for an electromagnetic machine design", IEEE Trans. Magn., vol. 51, no. 3, pp. 8200804, 2015.03
Link
|
|
[ 043
]
Phase Advance Control to Reduce Torque Ripple of Brushless DC Motor According to Winding Connection, Wye and Delta
|
|
Tae-Yong Lee, Jun-Young Song, Jaehong Kim, Yong-Jae Kim, Sang-Yong Jung, Jungmun Jae, "Phase Advance Control to Reduce Torque Ripple of Brushless DC Motor According to Winding Connection, Wye and Delta", Journal of Electrical Engineering & Technology, vol. 9, no. 6, pp. 2201-2208, 2014.11
Link
|
|
[ 042
]
Commutation Control for Low Commutation Torque Ripple in Position Sensorless Drive of Low-Voltage Brushless DC Motor
|
|
Sang-Yong Jung, Yong-Jae Kim, Jungmun Jae, Jaehong Kim, "Commutation Control for Low Commutation Torque Ripple in Position Sensorless Drive of Low-Voltage Brushless DC Motor", IEEE Trans. Power Electron., vol. 29, no. 11, pp. 5983-5994, 2014.11
Link
|
|
[ 041
]
Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor
|
|
Jong-Suk Ro, Sang-Yong Jung, Cheol-Gyun Lee, Hyun-Kyo Jung, Hyun-Kyo Jung, "Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor", International Journal of Applied Electromagnetics and Mechanics, vol. 46, no. 3, pp. 437-453, 2014.09
Link
|
|
[ 040
]
Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm
|
|
Il-Woo Kim, Dong-Kyun Woo, Sang-Yong Jung. Cheol-Gyun Lee, Hyun-Kyo Jung, Jong-Suk Ro, "Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm", Journal of Electrical Engineering & Technology, vol. 9, no. 3, pp. 859-865, 2014.05
Link
|
|
[ 039
]
Numerical and Experimental Design Validation for Adaptive Efficiency Distribution compatible to Frequent Operating Range of IPMSM
|
|
Hochang Jung, Deokjin Kim, Chun-beom Lee, Jihyun Ahn, Sang-Yong Jung, "Numerical and Experimental Design Validation for Adaptive Efficiency Distribution compatible to Frequent Operating Range of IPMSM ", IEEE Trans. Magn., vol. 50, no. 2, pp. 7021804, 2014.02
Link
|
|
[ 038
]
Numerical Design Compatibility of Induction Motor with Respect to Voltage and Current Source
|
|
Jihyun Ahn, Dongsu Lee, Gyeong-Jae Park, Yong-Jae Kim, Jinsung Kim, Sang-Yong Jung, "Numerical Design Compatibility of Induction Motor with Respect to Voltage and Current Source", IEEE Trans. Magn., vol. 50, no. 2, pp. 7019104, 2014.02
Link
|
|
[ 037
]
Design of Auxiliary Teeth on the Edge of Stationary Discontinuous Armature PM-LSM with Concentrated Winding
|
|
Sung-Jin Kim, Sang-Yong Jung, Yong-Jae Kim, "Design of Auxiliary Teeth on the Edge of Stationary Discontinuous Armature PM-LSM with Concentrated Winding", Journal of Magnetics, vol. 18, no. 3, pp. 352-356, 2013.09
Link
|
|
[ 036
]
Design Techniques for Reducing Cogging Torque in Permanent Magnet Flux Switching Machine
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Design Techniques for Reducing Cogging Torque in Permanent Magnet Flux Switching Machine", Journal of Magnetics, vol. 18, no. 3, pp. 361-364, 2013.09
Link
|
|
[ 035
]
Numerical Analysis on Iron Loss and PM Loss of Permanent Magnet Synchronous Motor Considering the Carrier Harmonics
|
|
Dongsu Lee, Yong-Jae Kim, Sang-Yong Jung, "Numerical Analysis on Iron Loss and PM Loss of Permanent Magnet Synchronous Motor Considering the Carrier Harmonics", Journal of Magnetics, vol. 18, no. 2, pp. 216-219, 2013.06
Link
|
|
[ 034
]
Design Characteristics of Torque Harmonics Reduction of Induction Motors for Electric Vehicle Propulsion
|
|
Kyung-Won Jeon, Yong-Jae Kim, Sang-Yong Jung, "Design Characteristics of Torque Harmonics Reduction of Induction Motors for Electric Vehicle Propulsion", Journal of Magnetics, vol. 18, no. 2, pp. 212-215, 2013.06
Link
|
|
[ 033
]
Min-Max Univariate Dynamic Encoding Algorithm for Searches (uDEAS) and Its Application to Optimal Design of Electric Machines
|
|
Jong-wook Kim, Dongsu Lee, Sang-Yong Jung, "Min-Max Univariate Dynamic Encoding Algorithm for Searches (uDEAS) and Its Application to Optimal Design of Electric Machines", IEEE Trans. Magn., vol. 49, no. 5, pp. 2201-2204, 2013.05
Link
|
|
[ 032
]
Intelligent MADS With Clustering and Elastic Net and Its Application to Optimal Design of Interior PM Synchronous Machines
|
|
Jong-wook Kim, Younglim Choi, Dongsu Lee, Sang-Yong Jung, "Intelligent MADS With Clustering and Elastic Net and Its Application to Optimal Design of Interior PM Synchronous Machines", IEEE Trans. Magn., vol. 49, no. 5, pp. 2209-2212, 2013.05
Link
|
|
[ 031
]
Cogging Torque Minimization and Torque Ripple Suppression in Surface-mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Cogging Torque Minimization and Torque Ripple Suppression in Surface-mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths", IEEE Trans. Magn., vol. 49, no. 5, pp. 2295-2298, 2013.05
Link
|
|
[ 030
]
Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes", IEEE Trans. Magn., vol. 48, no. 11, pp. 4228-4231, 2012.11
Link
|
|
[ 029
]
Integrated Optimization of Two Design Techniques for Cogging Torque Reduction Combined With Analytical Method by a Simple Gradient Descent Method
|
|
Daohan Wang, Xiuhe Wang, Mun-kyeom Kim, Sang-Yong Jung, "Integrated Optimization of Two Design Techniques for Cogging Torque Reduction Combined With Analytical Method by a Simple Gradient Descent Method", IEEE Trans. Magn., vol. 48, no. 8, pp. 2265-2276, 2012.08
Link
|
|
[ 028
]
Optimal Design of Direct-Driven PM Wind Generator Using Adaptive Univariate Dynamic Encoding Algorithm for Searches (uDEAS)
|
|
Sang-Yong Jung, Dongsu Lee, Min-Goo Choi, Jong-Wook Kim, "Optimal Design of Direct-Driven PM Wind Generator Using Adaptive Univariate Dynamic Encoding Algorithm for Searches (uDEAS)", International Journal Applied Electromagnetics and Mechanics, vol. 38, no. 4, pp. 167-180, 2012.06
Link
|
|
[ 027
]
Numerical Investigation on Torque Harmonics Reduction of Interior PM Synchronous Motor with Concentrated Winding
|
|
Seungho Lee, Yong Jae Kim, Sang-Yong Jung, "Numerical Investigation on Torque Harmonics Reduction of Interior PM Synchronous Motor with Concentrated Winding", IEEE Trans. Magn., vol. 48, no. 2, pp. 927-930, 2012.02
Link
|
|
[ 026
]
Numerical Investigation on Permanent-Magnet Eddy Current Loss and Harmonic Iron Loss for PM skewed IPMSM
|
|
Jinwoo Lim, Yong Jae Kim, Sang-Yong Jung, "Numerical Investigation on Permanent-Magnet Eddy Current Loss and Harmonic Iron Loss for PM skewed IPMSM", Journal of Magnetics, vol. 16, no. 4, pp. 417-422, 2011.12
Link
|
|
[ 025
]
Numerical Analysis and Design of Moving Contactless High Power Transformer
|
|
Dongsu Lee, Donguk Jang, Hyung-Chul Kim, Sang-Yong Jung, "Numerical Analysis and Design of Moving Contactless High Power Transformer", Journal of Magnetics, vol. 16, no. 4, pp. 423-426, 2011.12
Link
|
|
[ 024
]
Reducing Cogging Torque in Surface-mounted Permanent Magnet Motors by Nonuniformly Distributed Teeth Method
|
|
Daohan Wang, Dongwei Qiao, Ying Pei, Sang-Yong Jung, Xiuhe Wang, "Reducing Cogging Torque in Surface-mounted Permanent Magnet Motors by Nonuniformly Distributed Teeth Method", IEEE Trans. Magn., vol. 47, no. 9, pp. 2231-2239, 2011.09
Link
|
|
[ 023
]
Minimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge
|
|
Yong-Jae Kim, Sang-Yong Jung, "Minimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge", Journal of Magnetics, vol. 16, no. 3, pp. 288-293, 2011.09
Link
|
|
[ 022
]
Novel Analysis and Design Methodology of Interior Permanent Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage
|
|
Seungho Lee, Yu-seok Jeong, Yong-Jae Kim, Sang-Yong Jung, "Novel Analysis and Design Methodology of Interior Permanent Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage", IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3806-3814, 2011.09
Link
|
|
[ 021
]
Finite-Element analysis of Short-Circuit Electromagnetic Force in Power Transformer
|
|
Hyun-Mo Ahn, Ji-Yeon Lee, Joong-Kyoung Kim, Yeon-Ho Oh, Sang-Yong Jung, Sung-Chin Hahn, "Finite-Element analysis of Short-Circuit Electromagnetic Force in Power Transformer", IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1267-1272, 2011.05
Link
|
|
[ 020
]
Intelligent Memetic Algorithm Using GA and Guided MADS for the Optimal Design of Interior PM Synchronous Machine
|
|
Dongsu Lee, Seunhgo Lee, Jong-Wook Kim, Cheol-Gyun Lee, Sang-Yong Jung, "Intelligent Memetic Algorithm Using GA and Guided MADS for the Optimal Design of Interior PM Synchronous Machine", IEEE Trans. Magn., vol. 47, no. 5, pp. 1230-1233, 2011.05
Link
|
|
[ 019
]
Variable Mesh Adaptive Direct Search Algorithm Applied for Optimal Design of Electric Machines Based on FEA
|
|
Dongsu Lee, Jong-Wook Kim, Cheol-Gyun Lee, Sang-Yong Jung, "Variable Mesh Adaptive Direct Search Algorithm Applied for Optimal Design of Electric Machines Based on FEA", IEEE Trans. Magn., vol. 47, no. 10, pp. 3232-3235, 2011.01
Link
|
|
[ 018
]
Minimization of Outlet Edge Force using Stair Shape Auxiliary Teeth in a Stationary Discontinuous Armature Linear Permanent Magnet Motor
|
|
Yong-Jae Kim, Sang-Yong Jung, "Minimization of Outlet Edge Force using Stair Shape Auxiliary Teeth in a Stationary Discontinuous Armature Linear Permanent Magnet Motor", IEEE Trans. Magn., vol. 47, no. 10, pp. 3228-3231, 2011.01
Link
|
|
[ 017
]
Novel Memetic Algorithm implemented With GA(Genetic Algorithm) and MADS (Mesh Adaptive Direct Search) for Optimal Design of Electromagnetic System
|
|
Youngjun Ahn, Jiseong Park, Cheol-Gyun Lee, Jong-Wook Kim, Sang-Yong Jung, "Novel Memetic Algorithm implemented With GA(Genetic Algorithm) and MADS (Mesh Adaptive Direct Search) for Optimal Design of Electromagnetic System", IEEE Trans. Magn., vol. 46, no. 6, pp. 1982-1985, 2010.06
Link
|
|
[ 016
]
A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole
|
|
Jang-Ho Seo, Sang-Yeop Kwak, Sang-Yong Jung, Cheol-Gyun Lee, Tae-Kyung Chung, Hyun-Kyo Jung, Jang-Ho Seo, "A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole", IEEE Trans. Magn., vol. 45, no. 3, pp. 1824-1827, 2009.03
Link
|
|
[ 015
]
Cogging Force Verification of the Back-yoke Length of a Moving-coil-type Slotless Linear Synchronous Motor
|
|
Yong-Jae Kim, Sang-Yong Jung, "Cogging Force Verification of the Back-yoke Length of a Moving-coil-type Slotless Linear Synchronous Motor", Journal of Magnetics, vol. 14, no. 1, pp. 47-51, 2009.03
Link
|
|
[ 014
]
Harmonic Iron Loss Analysis of Electrical Machines for High-Speed Operation Considering Driving Condition
|
|
Jang-Ho Seo, Tae-Kyung Chung, Cheol-Gyun Lee, Sang-Yong Jung, Jang-Ho Seo, "Harmonic Iron Loss Analysis of Electrical Machines for High-Speed Operation Considering Driving Condition", IEEE Trans. Magn., vol. 45, no. 10, pp. 4656-4659, 2009.01
Link
|
|
[ 013
]
Optimal design of interior-permanent magnet synchronous machine for vehicle using improved niching genetic algorithm
|
|
Jang-Ho Seo, Sang-Yeop Kwak, Tae Kyung Chung, Sang-Yong Jung, Hyun-Kyo Jung, Jang-Ho Seo, "Optimal design of interior-permanent magnet synchronous machine for vehicle using improved niching genetic algorithm", International Journal Applied Electromagnetics and Mechanics, vol. 29, no. 1, pp. 37-45, 2009.01
Link
|
|
[ 012
]
Optimal Design of Direct-driven PM Wind Generator for Maximum Annual Energy Production
|
|
Sang-Yong Jung, Hochang Jung, Sung-Chin Hahn, Hyun-Kyo Jung, Cheol-Gyun Lee, "Optimal Design of Direct-driven PM Wind Generator for Maximum Annual Energy Production", IEEE Trans. Magn., vol. 44, no. 6, pp. 1062-1065, 2008.06
Link
|
|
[ 011
]
Optimization of Multilayer Buried Magnet Synchronous Machine Combined with Stress and Thermal Analysis
|
|
Jae-Kwang Kim, Sang-Yeop Kwak, Sung-Mun Cho, Hyun-Kyo Jung. Tae-Kyung Chung, and Sang-Yong Jung, Jae-Kwang Kim, "Optimization of Multilayer Buried Magnet Synchronous Machine Combined with Stress and Thermal Analysis", IEEE Trans. Magn., vol. 42, no. 4, pp. 1023-1026, 2006.04
Link
|
|
[ 010
]
Performance Evaluation of Halbach Magnetized Linear Generator for Mobile Apparatus
|
|
Ho-Yong Choi,, Hyun-Kyo Jung, Sang-Yong Jung, Ho-Yong Choi,, "Performance Evaluation of Halbach Magnetized Linear Generator for Mobile Apparatus", International Journal Applied Electromagnetics and Mechanics, vol. 20, no. 3-4, pp. 141-147, 2005.02
Link
|
|
[ 009
]
Phase Unbalance Compensation in Moving Coil Type PM Linear Synchronous Motor
|
|
Sang-Yong Jung, Ho-Yong Choi, Hyun-Kyo Jung, , Song-Yop Hahn, "Phase Unbalance Compensation in Moving Coil Type PM Linear Synchronous Motor", International Journal Applied Electromagnetics and Mechanics, vol. 19, no. 1-4, pp. 213-218, 2004.04
Link
|
|
[ 008
]
Improved Auto-Tuning Niching Genetic Algorithm Combined with Grouping Concept for Inverse Problem
|
|
Jae-Kwang Kim, Sang-Yong Jung, Hyun-Kyo Jung, Song-Yop Hahn, Dong-Hyeok Cho,Tae-Kyung Chung, Jae-Kwang Kim, "Improved Auto-Tuning Niching Genetic Algorithm Combined with Grouping Concept for Inverse Problem", International Journal Applied Electromagnetics and Mechanics, vol. 19, no. 1-4, pp. 561-566, 2004.04
Link
|
|
[ 007
]
Size Optimization of Steel-Cored PMLSM Aimed for Rapid and Smooth Driving on Short Reciprocating Trajectory using Auto-Tuning Niching Genetic Algorithm
|
|
Sang-Yong Jung, Jae-Kwang Kim, Hyun-Kyo Jung, Cheol-Gyun Lee, Sun-Ki Hong, "Size Optimization of Steel-Cored PMLSM Aimed for Rapid and Smooth Driving on Short Reciprocating Trajectory using Auto-Tuning Niching Genetic Algorithm", IEEE Trans. Magn., vol. 40, no. 2, pp. 750-753, 2004.03
Link
|
|
[ 006
]
Applicable Detent Force Reduction Methods in Steel-Cored Permanent Magnet Linear Synchronous Motor Based on Manufacturing Feasibility
|
|
Sang-Yong Jung, Hyun-Kyo Jung, "Applicable Detent Force Reduction Methods in Steel-Cored Permanent Magnet Linear Synchronous Motor Based on Manufacturing Feasibility", International Journal Applied Electromagnetics and Mechanics, vol. 19, no. 2, pp. 57-70, 2004.01
Link
|
|
[ 005
]
Development of a Superconducting Linear Synchronous Motor
|
|
Woo-Seok Kim, Sang-Yong Jung, Ho-Yong Choi, Hyun-Kyo Jung, Ji Hoon Kim, Song-Yop Hahn, Woo-Seok Kim, "Development of a Superconducting Linear Synchronous Motor", IEEE Trans. Appl. Supercond, vol. 12, no. 1, pp. 842-845, 2002.03
Link
|
|
[ 004
]
Running Characteristics of Permanent Magnet Linear Synchronous Motor Energized by Partially Excited Primary Current
|
|
Sang-Yong Jung, Hyun-Kyo Jung, "Running Characteristics of Permanent Magnet Linear Synchronous Motor Energized by Partially Excited Primary Current", International Journal Applied Electromagnetics and Mechanics, vol. 15, no. 1-4, pp. 183-187, 2002.01
Link
|
|
[ 003
]
Analytic Methodology for Slotless Permanent Magnet Linear Synchronous Motor considering End-Effect
|
|
Sang-Yong Jung, Hyun-Kyo Jung, Jang-Sung Chun, "Analytic Methodology for Slotless Permanent Magnet Linear Synchronous Motor considering End-Effect", International Journal Applied Electromagnetics and Mechanics, vol. 16, no. 3-4, pp. 219-223, 2002.01
Link
|
|
[ 002
]
Theoretic Means using Space Harmonics Method for Various Reluctance Analysis and End-Effect of Linear Induction Motor
|
|
Sang-Yong Jung, Hyun-Kyo Jung, "Theoretic Means using Space Harmonics Method for Various Reluctance Analysis and End-Effect of Linear Induction Motor", International Journal Applied Electromagnetics and Mechanics, vol. 16, no. 3-4, pp. 215-218, 2002.01
Link
|
|
[ 001
]
Performance Evaluation of slotless Permanent Magnet Linear Synchronous Motor Energized by Partially Excited Primary current
|
|
Sang-Yong Jung, Jang-Sung Chun, Hyun-Kyo Jung, "Performance Evaluation of slotless Permanent Magnet Linear Synchronous Motor Energized by Partially Excited Primary current", IEEE Trans. Magn., vol. 37, no. 5, pp. 3757-3761, 2001.09
Link
|
